If you've decided to build a pool with your hands, you've got to think about it as little as possible, and most importantly, to choose the right hydrosulation. There are now many different materials. One of the most recent developments is the hydro-insulation material of the new generation of the VR DLS.

Hydrochlorination of the new basin

Both external and internal work is needed. Particular attention must be paid to the hydrosolation of the basin ' s cup. The vegetation of the DLR allows, without special effort, the creation of a reliable hydro-insulation layer. It should be borne in mind, however, that the basin ' s hydrosolation, carried out by its hands, is not always reliable. This is usually due to the absence of working experience or due attention to the petty. There will be no such problem with the DLR, the material is easily handwritten and falls immediately to the necessary layer, creating a solid watertight membrane in drying.

Hydrotic insulation of the tea of the old basin

If, for some reason, the leakproofness of the basin, which is already in operation for some time, is well suited to the DELS material.

This is reflected in many factors:

• There's no need to remove the old hydrosulation layer. The mass has excellent adhesion and is easily contacted with already insulated materials;
• It can be wetted, so you won't have to dry the pool carefully;
• Excellent resistance to various mechanical effects and high elasticity;
• Longitude and resilience to different weather conditions. The pool in the yard with ease will not survive one winter and nothing will happen to the surface;
• There is a seamless coating in the mast, and water will not find a loophole in concrete;
• Rapid application with no air spray. The basin ' s hydrosolation, which is qualitatively carried out with its hands, will be as effective, but will require considerable effort and concentration. Especially if you're going to work with a valley or a brush. In large areas, it is easier to order a non-air polluting hydrosulation layer.

The average flow rate recommended by the manufacturer is 3-4 kg per 1 m2