Which could be more beautiful - a hot summer day to dine into cool water. It's even better if this process goes in its yard. The pool itself is the dream of private house owners and gifts. There are a large number of organizations willing to work on manufacturing and basin installation But there are several negative moments. It's a lot of pleasure and then who, as we don't, know what we need.

Let's see one of the simplest pool options, so-called home pond. For starters, we're determined by the location of the works, the possibility of connecting engineering systems. The walls of the boiler under the future basin are performed at an angle of 25 to 30 degrees. The soil is either removed or increased by it to the depth of the basin by laying the ground on the edge. The bottom and walls of the boiler must be carefully sealed and a sand of five to ten centimetres must fall asleep.

Next, we put hydrosulation on the whole surface of the boiler, hydrosulation is desirable to purchase the wool for safety. A polyethylene film may also come as a hydro-isolation, but it needs to be glued and the film is not mechanically damaged. The hydro-insulation shall be removed at fifty-seven centimetres from the basin and sealed with decorative products. For the illusion of the present pond and for the hydro-isolation of the basin ' s bottom, we're going to sleep with river sand, preferably wet.

The bottom pipe is used to clean and fill water in the pool. In the fall, the pool should be dismantled, drained water, cleaned and drained, and the next spring we repeat it again.

Much more effort and resources are needed to build a concrete basin.

Bethon basins are flooded in the floor or surface, i.e. on the surface. The construction of a concrete basin is labour-intensive, so, before you start construction, you will appreciate your strength. If you decide, the result will be happy for years.