This pool was installed today with the owner of a cozy house on the shore of a river with a diameter of 4.6 metres, a height of 120 cm. It's called the Azuro basin that produces it in Czechia, but almost the whole set and the filter is a mede in zin, outside the steel sheet as a carcasus, inside a vinyl plung similar to the heavy ceilings.

Set a metal carcas on a sandbag and lay low with dense panels, as the pool is on the ground of the old foundation and in the soil is very large, and the photo shows the openings in which the kimer and valve are later cut.

We're lucky to have solar weather, vinyl tape warmed up and stretched perfectly.

Started pouring water, stretching the hose speed and the neighbors. The tape was so tight that I didn't get to the bottom, and the weight of the water lays in no warehouse.

Here's a filter on a freshly removed pallet from the board.

After filling the pool with water, cut into the boiler holes and the inlet valve

In the blue plain, chlorine and algicide pills are dissolved

Everything's ready, water's been taken for about 12 hours, by noon of the second day of installation, water temperature is 13 degrees, but I still decided to swim.