Innovative technology in Russia for the use of PVC films in the construction of basins has already gained the confidence of many buyers, thanks to their properties and characteristics, and this is not an accident, as PVC film is ecologically clean, sustainable and sustainable to FM and seasonal changes of material of at least 30 years of service.

The benefits of PVC films

The advantages of PVC films in mounting are:

• High speed of construction;
  
• Cost of installation of works and materials;
  
• Fire-safe storage technology without use of open fire;
  
• Simple repairs and maintenance during operation.
  

The very process of laying films in the pool seems simple, but in fact requires professional knowledge and experience. Below, we will reveal to you all the secrets and thinness of high-quality work on the installation of PVC films.

For the most rapid and qualitative installation of the basin film, both the most standard tools are the scissors, the construction level, the perforator, the hammer, the charcoal, the steering wheel, the rolling valleys and sufficiently specific tools:

• Lips to open and cut the surface with a straight and curved blade
  
• Fen of hot air for welding of PVC-P coatings
  
• Flacon-appliator for the application of liquid PVC for the treatment of stitches after welding
  
• Special protective blankets against corrosion
  
• Switch quality test probe
  
• A metal cheek with a soft wire.
  

In addition, Installation of PVC films You must be spared by some of the components, without which it would be impossible to mount a film:

(1) Control dube (representing aluminium casing and a steel resistant to corrosion) shall be used to secure the foot of the film to the bottom and the basin walls)

(2) Creative elementswhich are intended to attach PVC films to the basin ' s base on the upper walls, stairs and other parts of the basin):

• Blade (metallic strip of unlegated steel)
  
• LOH-Ugol (size according to the characteristics of the Bordür
  

(3) Liquid PVX glue (which is followed by a footage identical to the properties of the membrane, which reduces the risk of a drip pump of moisture with an PVC-plank)

(4) Hot air equipment for welding (temperature range: +380 to +450 °C) (Instruction! Normal construction fen cannot be used because of air temperature instability at the outlet of the solar)